HyPOWER provides total fluid cleanliness management solutions that optimize the reliability of industrial and mobile equipment utilizing hydraulic and lubrication systems.  HyPOWER offers Pall filtration products and fluid conditioning equipment to tackle industry’s toughest fluid contamination challenges.  HyPOWER also offers a complete line of filtration products to meet the needs of your process application. Team with HyPOWER’s Certified Fluid Power Specialists and Application Engineers to plan and achieve your total fluid cleanliness solution.  Hydraulic and lubrication fluids are the life blood of any mechanical system – let us help you improve your reliability with our world class Pall filtration products and services.

Contamination Control in Hydraulic and Lube Systems

Over 70% of all mechanical component failures are due to surface degradation, most of which is brought on by particulate in hydraulic and lubricating oils. Improving fluid cleanliness means reduced downtime, more reliable equipment, longer fluid life, fewer maintenance hours, and reduces costly component replacement or repair expenses. An improvement of just two ISO codes can mean a doubling of component life in your hydraulic or lube system!

Set a target ISO code … let HyPOWER help you develop a plan to achieve and maintain target fluid cleanliness. Arm yourself with the support, training, tools and practices to operate more efficiently, maximize uptime and save money.

New oil can be one of the worst sources of particulate and water contamination. 22/20/18 is a common ISO code for new oil which is not suitable for hydraulic or lubrication systems. A good target for new oil cleanliness is 16/14/11.

Water and Entrained Gas in Lube Oils

The effects of water in oil systems can drastically reduce lube performance and reliability. Bearing life and critical component life is greatly reduced by water levels above the saturation point. Continuous or periodic high water levels can result in damage such as:

• Corrosion
• Loss of film thickness - abrasive wear
• Loss of dielectric strength
• Fluid Breakdown
• Additive precipitation and oil oxidation
• Reduction in lubricating properties

Many technologies exist for the removal of free water from hydraulic and lube oils. Absorbent filters, centrifuges and coalescers can only remove free water. The best way to remove dissolved water is by vacuum dehydration. With our complete line of Pall vacuum dehydrators, we can achieve water contents well down into the dissolved range.

Diagnostics for Hydraulic and Lube oils

We have the complete line of Pall diagnostic tools – all designed to deliver information on the health of your fluids …

• Mesh blockage device
• Laser particle counters
• Water Sensor

Element Upgrades

We have “Pall-Fit” element upgrades for the following brands. Hydac

• Parker
• Schroeder
• MP Filtri
• Internormen
• Donaldson
• Vickers
• Eppensteiner
• Hilco
• Kaydon
• PTI
• Stauff
• Western
• Fairey Arlon
• Cuno
• Baldwin
• Fleetguard
• Yamashin
• And many more!

We can deliver better fluid cleanliness results without the need to replace the housing.

Flushing and Fluid Transfer

We have a rental fleet which includes flushing skids, transfer filter carts, and vacuum dehydrators (purifiers).

Diesel Fuel Conditioning

Utilizing coalescing technology, we remove free water from diesel fuels in a single pass or re-circulating configuration. Systems include complete skids with control panel and pump to ‘filtration only’ skids that can be installed in-line on existing delivery or re-circulating systems. High efficiency particulate filtration improves fuel cleanliness and protects pumps and injectors.

Process Filtration

In partnership with Pall Corporation, we have the capabilities to solve complex contamination, separation and purification problems. With the broad Pall line of products and services, we can help you improve fluid quality and increase profitability by optimizing the performance of your process equipment.

Regardless of your specialization, we have filtration and separation solutions to meet your increasing production and processing needs. Our products are designed to meet your requirements for separation efficiency, reliability, economy, and size. We can solve your purification challenges in any size of application, from small flows and simple installations to large flows and complex systems, from the supply of filter elements to fully-integrated turnkey systems.